Jianfan Hemoperfutor User Manual: Complete Guide

Table of Contents

Introduction to the Jianfan Hemoperfutor

The Jianfan Hemoperfutor is a state-of-the-art medical device used for extracorporeal blood purification, particularly in cases requiring toxin removal or metabolic waste filtration. Designed with patient safety and clinical efficiency in mind, the device has become essential in ICUs and dialysis centers worldwide. This Jianfan Hemoperfutor User Manual provides a detailed yet accessible explanation of how to operate, maintain, and troubleshoot this critical piece of equipment.

Device Components and Their Functions

Understanding the components of the Jianfan Hemoperfutor is crucial for its correct use. The device is composed of several interdependent parts:

Adsorption Cartridge – This is the core filter where blood toxins are captured.
Blood Circulation Circuit – Comprising input/output tubing that circulates blood through the cartridge.
Monitoring Control Panel – A digital interface that displays system diagnostics and patient parameters.
Pump Mechanism – Maintains consistent flow rate and pressure.
Alarm System – Ensures safety by notifying the operator of any irregularities.

Below is a table summarizing the main components and their functions:

Component	Function
Adsorption Cartridge	Removes toxins from circulating blood
Tubing Set	Transfers blood to and from the cartridge
Control Panel	Displays data and allows parameter adjustments
Pump	Ensures steady blood flow
Alarm System	Alerts to operational issues or anomalies

Pre-Installation Requirements

Before setting up the Jianfan Hemoperfutor, ensure the following conditions are met:

A dust-free environment with temperatures between 20°C to 28°C.
Reliable power source that matches the device’s voltage rating.
Availability of medical-grade priming fluids and sterilized tubing sets.

These conditions help ensure optimal performance and patient safety during operations.

Setting Up the Device

Setting up the Jianfan Hemoperfutor is straightforward but must be done carefully:

Unbox the device and inspect all components.
Connect the power cable and verify voltage compliance.
Attach tubing to inlet and outlet ports securely.
Install the adsorption cartridge and prime with sterilized fluid.
Turn on the device and run a preliminary flow test to check system integrity.

Operating the Jianfan Hemoperfutor

To operate the machine:

Switch on the power and wait for the system self-check to complete.
Select the appropriate treatment mode from the control panel.
Monitor flow rate, pressure, and temperature.
Adjust parameters if necessary based on real-time patient data.
Stay alert for any alarms and refer to the on-screen guide for quick fixes.

Treatment Parameters and Adjustments

The success of hemoperfusion depends on the accurate control of key parameters:

Flow Rate: Typically between 150-200 mL/min. Must be adjusted depending on patient condition.
Pressure: Input/output pressure should be constantly monitored.
Temperature: Maintain blood temperature close to body temperature to avoid hypothermia.

Maintenance and Cleaning Protocols

Regular maintenance ensures the device’s reliability. Follow these guidelines:

Daily

Rinse tubing with saline after each use.
Wipe down the external surface with medical-grade disinfectant.

Weekly

Inspect tubing for cracks or blockages.
Run a system diagnostic from the control panel.

Monthly

Replace adsorption cartridge.
Perform a software update if available.

Post-Treatment Procedures

Once treatment is complete:

Shut down the machine and disconnect tubing.
Dispose of used cartridges as per biomedical waste guidelines.
Clean and sterilize reusable components.
Store the unit in a clean and dry area.

Troubleshooting Common Issues

If problems arise, refer to this quick guide:

Issue	Possible Cause	Recommended Action
Device won’t start	Power supply issue	Check plug and voltage
Alarm triggered	Tubing blockage or pressure	Inspect tubing and cartridge
Low flow rate	Kinked tubing or pump fault	Re-seat tubing and restart device

Technical Specifications

Specification	Details
Voltage	110-240V AC, 50/60Hz
Flow Rate	50-300 mL/min
Cartridge Capacity	3-6 hours
Device Weight	Approx. 15 kg

Safety and Compliance

Ensure that all operators are trained and certified. Always follow hospital safety protocols, including:

Wearing PPE during device operation.
Conducting pre-treatment safety checks.
Using only approved accessories and cartridges.

Frequently Asked Questions (FAQs)

Can the Jianfan Hemoperfutor be used for pediatric patients? Yes, but with adjusted flow rates and under specialist supervision.
What should I do if the screen freezes during operation? Perform a soft reset using the panel’s manual reset button.
Can I use a generic adsorption cartridge? Only use cartridges approved by the manufacturer to avoid malfunction.
Does the device come with remote monitoring capabilities? Certain models include Wi-Fi or Bluetooth modules for this purpose.
Is there a battery backup in case of power failure? Yes, the unit includes a short-term UPS system for safe shutdown.

Additional FAQs for Value

How often should the firmware be updated? Check quarterly for updates and apply them to maintain optimal performance.
What certifications does the device have? The Jianfan Hemoperfutor meets CE and ISO 13485 standards.
Can it be integrated with patient EMR systems? Yes, through optional software interfaces.
What is the shelf life of the cartridge? Unopened cartridges typically last 2 years from the manufacture date.
Is multilingual support available? Yes, the control panel supports multiple languages including English, Mandarin, and Spanish.

Conclusion

This Jianfan Hemoperfutor User Manual serves as your complete guide for understanding, operating, and maintaining this vital blood purification device. With its user-friendly design, safety features, and detailed operational guidance, the Jianfan Hemoperfutor stands out as a top-tier choice for medical facilities seeking reliable hemoperfusion solutions. Use this guide to ensure optimal usage and patient safety while keeping the device in top working condition.